Bathar
Siostam Yucera CADCAM Zirconia Blank Dental 3D Pro Multilayer Zirconia Block airson càradh bòidhchead
Tuairisgeul toraidh
Siostam Yucera CADCAM Zirconia Blank Dental 3D Pro Multilayer Zirconia Block airson càradh bòidhchead
Tuairisgeul toraidh mionaideach air diosc ioma-fhilleadh Goozir Zirconia 3D Pro:
| Ainm | Blocaichean ioma-fhilleadh Goozir Zirconia 3D Pro |
| Sintered Density | 6.07 ± 0.03g / cm3 |
| cruas | 1200HV |
| Teòthachd sintering | Moladh 1500 ℃ |
| Neart lùbte | 1050 Mpa-700Mpa |
| Translucency | 43%-57% |
Cur an gnìomh Goozir 3D agus bloc zirconia multilayer:
Veneer
Crùn posterior
Drochaid làn chrùn
Crùn roimhe
Inlay Drochaid làn sgriubha contour glèidhte
Drochaid crùn bogha làn
Implant
Siostam ri fhaighinn, meud agus dubhar airson diosc zirconia 3D agus multilayer:
| Siostam fosgailte | Siostam Zironzahn | Shades rim faighinn |
| 98*10mm | 95*10mm | A1-D4, BL1, BL2, BL3 |
| 98*12mm | 95*12mm | A1-D4, BL1, BL2, BL3 |
| 98*14mm | 95*14mm | A1-D4, BL1, BL2, BL3 |
| 98*16mm | 95*16mm | A1-D4, BL1, BL2, BL3 |
| 98*18mm | 95*18mm | A1-D4, BL1, BL2, BL3 |
| 98*20mm | 95*20mm | A1-D4, BL1, BL2, BL3 |
| 98*22mm | 95*22mm | A1-D4, BL1, BL2, BL3 |
| 98*25mm | 95*25mm | A1-D4, BL1, BL2, BL3 |
Buannachd
Is e 3D plus Multilayer an zirconia clas deireadh as àirde, an zirconia as nàdur, a bhios ag atharrachadh dath (bho dhorcha gu solas), neart (bho 1050mpa-700mpa), agus gluasaid (43% -57%) mean air mhean bho cheirbheacsach gu pàirt incisal aig aon diosc zirconia.
Faodaidh e an dà chuid fiaclan posterior agus fiaclan anterior a dhèanamh.Aon zirconia airson a h-uile comharra a chòmhdach.
