Okumhlophe 98x20mm 1530 ℃ I-Zirconium Blocks Yesithombe Esifakiwe Selebhu Yamazinyo

Ezimhlophe 98x20mm 1530 ℃ Zirconium Blocks Zelebhu Yamazinyo

Incazelo emfushane:

Isici se-white HT zirconia block:

1.Ukukhanya okuphezulu

2.Amandla okugoba okukhazimulayo kanye nokuvimba kwezomnotho

3.Ifanele ukubhekana nesimo kanye nohlaka

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Ezimhlophe 98x20mm 1530 ℃ Zirconium Blocks Zelebhu Yamazinyo

Izinzuzo ze-White Zirconia Block

1. I-Zirconia iwuhlobo lwamaminerali olukhona emvelweni njenge-oblique zircon.I-zirconia yezokwelapha iye yahlanzwa futhi yacutshungulwa, futhi inani elincane lezinsalela ze-alpha-ray lihlala ku-zirconium, futhi ukujula kwayo kokungena kuncane kakhulu, ama-microns angu-60 kuphela.

2. Ukuminyana okuphezulu namandla.

(1) Amandla aphindwe izikhathi ezingu-1.5 kunesizukulwane sesibili se-EMPRESS.

(2) Amandla angaphezulu kuka-60% ngaphezu kwe-alumina ye-INCERAM.

(3) Ukumelana nokuqhekeka okuyingqayizivele nokusebenza kanzima kokuphulukisa ngemva kokuqhekeka.

(4) Amabhuloho e-porcelain anamayunithi angaphezu kuka-6 angenziwa, okuxazulula inkinga yokuthi amasistimu e-ceramic angeke asetshenziswe njengamabhuloho amade.

3. Umzwelo wemvelo wombala wezinyo kanye nomphetho womqhele ongabonakali futhi izinzuzo ezilethwa ukusetshenziswa kwe-zirconia all-ceramic restoration.Ikakhulukazi ezigulini ezinezidingo eziphezulu zobuhle, zinaka kakhulu inzuzo yombala wemvelo, ngoba lokhu kwenza ukubuyisela kuhlanganiswe namazinyo anempilo, okunzima ukuhlukanisa.

4. Ubuwazi?Uma amazinyo okufakelwa emlonyeni wakho kuwumqhele we-porcelain oqukethe insimbi, azothinteka noma asuswe lapho udinga ukwenza i-X-ray yekhanda, i-CT, noma i-MRI.I-zirconium dioxide engeyona eyensimbi ayiwavimbi ama-x ray.Uma nje amazinyo e-porcelain e-zirconium dioxide efakiwe, asikho isidingo sokususa amazinyo okufakelwa lapho kudingeka ukuhlolwa kwekhanda, i-CT, ne-MRI esikhathini esizayo, konga izinkinga eziningi.

5. I-Zirconium dioxide iyimpahla yebhayoloji yobuchwepheshe obuhle kakhulu.I-biocompatibility enhle, engcono kunama-alloys ensimbi ahlukahlukene, kuhlanganise negolide.I-Zirconium dioxide ayinakho ukucasuka futhi akukho ukusabela okungezwani nezinsini.Ifaneleka kakhulu emgodini womlomo futhi igwema ukungezwani komzimba, ukucasuka kanye nokugqwala okubangelwa izinsimbi emgodini womlomo.

Izici ze-Zirconium Blocks

1. Umbala wemvelo.Uma kuqhathaniswa nombala wamazinyo e-porcelain endabuko, umbala wamazinyo e-zirconia porcelain ngokwemvelo ubushelelezi, ungokoqobo ngokubukeka futhi unamandla obala.

2. I-biocompatibility enhle.Alinakho ukucasuka, akukho ukungezwani nezinsini, futhi akukho umugqa omnyama wezinsini owenziwe.Ifaneleka kakhulu emgodini womlomo futhi igwema ukungezwani komzimba, ukucasuka, ukugqwala nezinye izinto ezingathandeki ezibangelwa amazinyo ensimbi yendabuko ye-porcelain emgodini womlomo.

3. Umzimba wezinyo unamandla aphezulu nobulukhuni.Ukumelana okuyingqayizivele kokuqhekeka kanye nezakhiwo ezinamandla zokuphulukisa ngemva kokuphuka kwenza izinyo libe namandla.

4. Ukunemba okuphezulu nokunamathela okuhle konqenqemeni.Amazinyo e-porcelain e-zirconia aqinisekisa ukunemba komqhele wangaphakathi wesikhunta kanye nokuqina okuhle kakhulu konqenqema, ukuze amazinyo e-porcelain enziwe asondelene kakhulu nesiguli somlomo.

Izinkomba ze-HT White HT Zirconia Block

Coping, Inlay, Onlay, Bridge, Crown

Izici Zomzimba ze-HT White Zirconium Blank

Izici Zomzimba

Ukuminyana kwe-Sintered: 6.07±0.01g/cm³

Amandla Okugoba: 1200 MPa

Ukuhambisa: 41%

Ukuqina: 1200HV

Ukushisa kwe-Sintering 1480 ~ 1550 ℃ / ncoma 1530 ℃

I-Sintering Curve ye-White HT Zirconia Block

Ijika le-HT/ST Sintering (1-5)
Isinyathelo se-Sintering	Izinga Lokushisa Lokuqala(℃)	Izinga lokushisa lokugcina(℃)	Isikhathi(Amaminithi)	Linganisa(℃/Mizu)
Isinyathelo 1	20	300	30	9.3
Isinyathelo sesi-2	300	1200	150	6
Isinyathelo sesi-3	1200	1530	110	3
Isinyathelo sesi-4	1530	1530	120	0
Isinyathelo sesi-5	1530	800	100	-7.3
Isinyathelo sesi-6	800	ukupholisa kwemvelo 20	120	-6.5

Ijika le-HT/ST Sintering (amayunithi ayi-10)
Isinyathelo se-Sintering	Izinga Lokushisa Lokuqala(℃)	Izinga lokushisa lokugcina(℃)	Isikhathi(Amaminithi)	Linganisa(℃/Mizu)
Isinyathelo 1	20	300	30	9.3
Isinyathelo sesi-2	300	1200	190	4.7
Isinyathelo sesi-3	1200	1530	150	2.2
Isinyathelo sesi-4	1530	1530	120	0
Isinyathelo sesi-5	1530	800	120	-6
Isinyathelo sesi-6	800	ukupholisa kwemvelo 20	120	-6.5

Inkonzo yethu

I-1, i-Yucera isungula ukubambisana nesikhungo esikhulu sokucubungula amazinyo okufakelwa kanye nezibhedlela zomlomo, thola ukusebenza okuvelele emkhakheni futhi uthole idumela elihle ochwepheshe neziguli.

2, Sesivele siphumelele isitifiketi se-CE ne-ISO.

Ngiqinisekile ukuthi imboni yethu ilungele uhlelo lwakho emakethe yakho.

Siyakwamukela noma yikuphi ukuphawula.