98x10mm HT 1250MPA 1530 ℃ Dental Zirconia Blocks

Tlhaloso e Khutšoanyane:

HT Meno ea Zirconia Blocks

1.E phahameng e khanyang

2.Brilliant kobang matla le thibela moruo

3.E loketse ho sebetsana le maemo le moralo

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Meno a Maiketsetso a Phahameng a Translucency HT Mofuta oa Meno o BulehilengZirconia Blocks

98x10mm HT 1250MPA 1530 ℃ MenoZirconia Blocks

Tlhaloso ea Sehlahisoa Ea HT Zirconia Block

1.Super translucent kapa prettau e lumellanang zirconia ke tsa contour moqhaka o feletseng le marokho

2.High translucent bakeng sa ho sebetsana le maemo a tloaelehileng le borokho

3.Ultra translucent bakeng sa ka pele

- Phofo ea Zirconia ea sehlopha sa pele

- E entsoe tlas'a COLD ISOSTATIC UNAXIAL PRESSING AND MACHINING e fanang ka ho lekana ho feta.

- Matla a phahameng a mochini a fihla holimo ho 600 Mpa e bitsoang zirconia e sa robeheng

- Translucent e ntle haholo e nang le phetisetso ea leseli e fetang 30%

- Shrinkage e lokiselitsoe 20%

- Sinterization mocheso 1480 Celcius lihora tse 2

Tlhaloso e qaqileng ea Sehlahisoa ea HT White Zirconia Blocks:

Lebitso	Li-block tsa zirconia tsa Yucera HT tse tšoeu
Sintered Density ea li-block tsa zirconia tsa mantlha	6.07 ± 0.03g/cm3
Boima ba li-blocks tsa pele tsa zirconia	1200HV
Sintering Mocheso oa li-block tsa zirconia tsa mantlha	Khothalletsa 1530 ℃
Matla a ho Koba a li-block tsa zirconia tsa mantlha	1200Mpa
Translucency ea li-blocks tsa pele tsa zirconia	40%

Li-blocks tsa meno tsa Zirconia Likaroloana

1.Safety: Ha ho ho teneha, Ha ho kutu, ho lumellana hantle ha lintho

2.Botle: 'Mala oa meno a tlhaho o ka hlahisoa hape

3.Ho phutholoha: Conductivity e tlase ea mocheso, liphetoho tse chesang le tse batang ha li tsose pulp.

4.Durability: Ho feta 1600MPa matla a ferekaneng, a tšoarella ebile a na le thuso

Likheo tsa HT zirconia li batlisisoa le ho etsoa ke Yucera.Re khetha boleng bo phahameng ba zirconium phofo e romelloang kantle ho naha, ho kopanya le phofo e mebala e fapaneng, ho hatella, ho bopa, pele ho sintering ho etsa likheo tsa zirconia, ho thusa ho rarolla mathata a kang mebala e sa tšoaneng, letheba, ho feta phapang e totobetseng le e mpe pakeng tsa ka pele le ka morao.

Sekoti sa zirconia ha se na chefo ebile ha se radioactive se nang le thepa e ntle ea likokoana-hloko, 'mala oa meno o tšoana le meno a sebele a nang le matla a ho phunyeletsa le aesthetics.E na le matla a phahameng, boima bo botle le khanyetso e ntle ea ho roala, X-cera pre-shaded zirconia blank ke thepa e tala e nang le thepa e ntle haholo ea ho etsa meqhaka.

Sistimi e sebetsang: wieland, sirona, kavo, lava, amann girrbach le cercon, joalo-joalo.

Melemo ea Zirconia

Boima bo phahameng le matla.

(1) Matla a phahame ka makhetlo a 1,5 ho feta moloko oa bobeli oa EMPRESS.

(2) Matla a phahame ho feta 60% ho feta alumina ea INCERAM.

(3) Khanyetso e ikhethang ea ho qhekella le ts'ebetso e thata ea ho phekola ka mor'a ho phatloha.

(4) Ho ka etsoa marokho a porcelain a nang le li-unit tse fetang 6, tse rarollang bothata boo litsamaiso tsohle tsa ceramic li ke keng tsa sebelisoa ha e le marokho a malelele.

Lipontšo tsa HT white zirconia block

Coping, Inlay, Onlay, Bridge, Crown

Sintering curve ea HT zirconia block

HT/ST Sintering Curve (1-5)
Sintering mohato	Mocheso oa ho Qala(℃)	Mocheso oa ho Qetela(℃)	Nako(Mets)	Reite(℃/Mots)
Mohato oa 1	20	300	30	9.3
Mohato oa 2	300	1200	150	6
Mohato oa 3	1200	1530	110	3
Mohato oa 4	1530	1530	120	0
Mohato oa 5	1530	800	100	-7.3
Mohato oa 6	800	pholiso ea tlhaho 20	120	-6,5

HT/ST Sintering Curve (diyuniti tse 10)
Sintering mohato	Mocheso oa ho Qala(℃)	Mocheso oa ho Qetela(℃)	Nako(Mets)	Reite(℃/Mots)
Mohato oa 1	20	300	30	9.3
Mohato oa 2	300	1200	190	4.7
Mohato oa 3	1200	1530	150	2.2
Mohato oa 4	1530	1530	120	0
Mohato oa 5	1530	800	120	-6
Mohato oa 6	800	pholiso ea tlhaho 20	120	-6,5