Feme ea Yucera e sebetsanang le tlhahiso ea zirconia, li-ceramic tsa li-ceramic tse silang lihlooho tsa zirconia 100 ka lebokoseng Setšoantšo se bontšitsoeng.

Fektheri ea Yucera e sebetsanang le tlhahiso ea zirconia, lihlooho tsa ho sila tsa li-ceramic tsa zirconia 100 ka lebokoseng.

Tlhaloso e Khutšoanyane:

Tlhaloso ea lisebelisoa tsa polishing tsa zirconia tsa meno:

1. ts'ebetso e phahameng ea lisebelisoa tsa meno tsa zirconia tse nang le lijo-thollo tse hloekileng tsa daemane ho fana ka liphello tse babatsehang.Phokotso e khuts'oane, ho boreleli le ho bentša bakeng sa seipone se khanyang.

2. e etsa liphetoho tse kholo Chaena, tšepe e matla e phahameng e kang zirconium le alumina.

3. Letoto la D2 (monochrome): ho fokotsa, ho fokotsa, ho boreleli le ho bentša khanya e phahameng ea Chaena, tšepe ea bohlokoa, meta, zirconium, joalo-joalo D.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Yucera ke moetsi ea hloahloa oa lisebelisoa tsa meno, lisebelisoa tsa meno le lisebelisoa tsa meno, e fanang ka theko e tlase ea feme le boleng bo holimo..

Molemo oa Lisebelisoa tsa ho Hloekisa ka Meno e Sintered Electroplated Diamond Bur:

1. Khaola haholo

2. E nepahetse ebile e tšoarella

3. E loketse bakeng sa li-ceramics tsa sila kapa tsa polish

Tsobotsi ea Meno ea Sintered Electroplated Diamond Bur polishing Tools :

Lisebelisoa tsa lisebelisoa tsa 1.dental lab, lisebelisoa tsa meno, lihlahisoa tsa lisebelisoa tsa meno

2.Li-burs kaofela li holim'a shaft ea 2.35mm, shank ea mofuta oa HP

3.Tekanyo e phahameng ea lebelo: 25,000RPM;E khothalelitsoe: 10,000 ~ 15,000 RPM

Quality of Dental Sintered Electroplated Diamond Bur Polishing Tools:

1.Sintered diamond burs bakeng sa lilaboratori tsa meno, e ka sebelisoa bakeng sa mefuta eohle ea likopo ka laboratoring ea meno.

2.Consist ea litaemane ho pholletsa le, sintered daemane burs hape ka ho khetheha etselitsoe ho khaola le ho fokotsa Zirconia, Alumina Oxide le tse ling tse thata ceramic le mabenyane thepa, loketseng bakeng sa ho bōpa, ho betla le ho bentsa mefuta eohle ea liminerale.

3.Last 5 ho 10 linako tse telele ho feta daemane plated burs le ho fihlela ho 100 makhetlo a 100 ho feta silicon polisher kapa mounted majoe.

Sepholisa sa Lebili la Silicon Rabara ea Meno:

1.Lisebelisuoa tse entsoeng ka silicon li fana ka melemo e hlakileng bakeng sa ho fokotsa le ho boreleli porcelain (ceramic), ha ho le joalo, li sebetsa ka potlako le ka mokhoa o atlehileng ka thepa e ngata, li-alloys tsa khauta le acrylic.

2.All burs na le HP shank, 3/32”, ISO104, shank bophara 2.35mm.E lekana le motlakase o monyane oa motlakase.

Letoto	Mmala	Grit	Tšebeliso
"C" letoto la silicon rabara mabili polisher	tšoeu	mahoashe	Kakaretso ea morero oa ho fokotsa porcelain, tšepe ea bohlokoa, acrylic le enamel ea leino.
	pinki	mahareng	hlobo le porcelain e boreleli, tšepe ea bohlokoa, acrylic le enamel ea leino.
	putsoa	hantle	polishers e bonolo, e tenyetsehang bakeng sa khanya e phahameng ea porcelain, li-alloys tsa tšepe tsa bohlokoa

Setsi sa tlholisano sa laboratori ea meno ea silicon rabara e bentšang/polisher:

1. Ho phutholoha haholoanyane ka khatello e fokolang

2. Ho hloka mocheso: ha ho hlokahale hore metsi a pholisoe

3. E tšoarella haholoanyane tlasa PRM ea rona e khothalelitsoeng

Tšebeliso ea laboratori ea meno ea silicon e bentšang rabara/polisher:

Lisebelisoa tsena tse entsoeng ka rabara tse kopantsoeng le rabara li lumella hore ho be le phapang e kholo ea matla a mochine ho hlahisa li- polishers bakeng sa khauta, amalgam, leino la tlhaho, leino la tlhaho, leino le mefuta e fapaneng ea ho tlatsa hammoho le lisebelisoa tse thata, tse thata le tse thata tse kang titanium, li-alloys tsa tšepe tse se nang bohlokoa le platinum. .

Lipotso le Likarabo

В1.Na u k'hamphani ea moetsi kapa ea khoebo?

A: Re moetsi oa OEM / OBM.

В2.Mokhoa ofe oa ho lefa?

A: Mofuta oa tefo: t / T, West Union, PayPal, L / C joalo-joalo D. (Komisi ea ho fetisetsa ho moreki).Melao e meng.Leano la mohlala: re ka fana ka mehlala ntle le mahala.

В3.A na ho na le theolelo e kholo ea thepa ea mantsiboea?

A: Re fana ka theolelo bakeng sa odara e kholo.

В4.O fana ka litšebeletso tsa OEM?

A: E, re ka fana ka litšebeletso tsa OEM bakeng sa thepa ea meno.

5. nka odara joang?

A: Re tla etsa tlhahiso ka mor'a hore u re romelle moralo oa hau oa theko (ho kenyeletsoa lebitso la sehlahisoa, mohlala le bongata).Haeba u lumellana le tlhahiso, ka kopo re romelle lebitso la k'hamphani ea hau, aterese le nomoro ea mohala ho tlisa thepa.Re tla etsa invoice ea pele 'me re u tsebise mokhoa oa ho lefa.Lintlha tsa thomello le tsona li tla tlalehoa ka nepo.

В6.Lipehelo tsa hau tsa theko ke life?

A: Theko ea rona e qotsitsoe ho EXW CIF le mantsoe a FOB, ka kopo ikopanye le rona ka imeile, WhatsApp.

В7.Nako ea ho beleha ke mang?

A: Matsatsi a 5-7 a ho sebetsa ka lengolo-tsoibila.

Haeba u na le mathata a ho sebelisa, u ka hlalosa bothata ka botlalo, re tla kopa setsebi ho u fa tharollo.

E fetileng: Dental Lab CAD CAM 5 axis for crconia block wax PMMA fatling and milling machine

E 'ngoe: Yucera Fraiseuse 5 Axes Dentaire For Zirconia PMMA Wax 5 Axis Dental CADCAM Milling Machine For Odontologia Equipamento

Ngola molaetsa wa hao mona mme o re romele wona