Buy Best Pre Shaded Zirconia Block Quotes Pricelist - YUCERA 16 Color 3D Plus 1500 ℃ Multilayer Zirconia Block – Yurucheng

Yucera Zirconia Block 3D Plus Multilayer 16color Zirconia Blocks

Benefits of 3D plus multilayer zirconia blocks
High flexural strength, fracture resistance, exceptional durability, and easy milling properties with precision. Pre-shaded zirconia disc consisting of three pre-colored layers Easy Handling: Polish or Glaze after Sintering Ideal for full contour crowns and bridges

Reduce preparation dramatically No need for porcelain Restoration seated firmly Eliminates the possibility of porcelain chipping No need to take out restoration under imaging medical examinations fast and efficient sintering technology Unique coloring changing effect No need for coloring liquids For open systems with different sizes such as Wieland, Sirona, Zirconzahn, Kavo, Lava, Amann Girrbach, Cercon, Dentmill etc.

Zirconia Block Introduction

Yurucheng zirconia block has high strength, excellent permeability and color aesthetic repair effect that suitable for CAD/CAM system and manual system.

Product Features of 3D plus multilayer zirconia blocks

Safety:No irritation,No corrosion,Good bio-compatibility

Beauty:Natural teeth color can be reproduced

Comfortability:Low thermal conductivity,hot and cold changes do not stimulte the pulp

Durability:Over 1600MPa perturbed strength, durable and useful

3D plus Multilayer Color Zirconia Block

1. 6 layers multilayer color

2.From 43-49% gradient for transparency

3.Strength shows gradient from 600Mpa to 900Mpa

4. Suitable for anterior, crown and bridge

Recommended Indications of 3D Plus Multilayer Zirconia Blocks 

Veneer

Posterior crown

Full crown bridge

Anterior crown

Inlay

Full contour screw

retained bridge

Full arch crown Implant

bridge

Crown, Inlay, Onlay, 2-5 unit Bridges, Anterior,implant

FAQ:

1. Zirconia is a kind of mineral that exists in nature as oblique zircon. Medical zirconia has been cleaned and processed, and a small amount of alpha-ray remnants remain in the zirconium, and its penetration depth is very small, only 60 microns.

2. High density and strength.

(1) The strength is 1.5 times higher than the second generation of EMPRESS.

(2) The strength is more than 60% higher than INCERAM alumina.

(3) Unique crack resistance and tough curing performance after cracking.

(4) Porcelain bridges with more than 6 units can be made, which solves the problem that all-ceramic systems cannot be used as long bridges.

3. The natural feeling of tooth color and the inconspicuous crown edge are also the benefits brought by the use of zirconia all-ceramic restoration. Especially for patients with high aesthetic requirements, they pay more attention to the advantage of natural color, because this makes the restoration integrated with healthy teeth, which is difficult to distinguish.

4. Did you know? If the denture in your mouth is a metal-containing porcelain crown, it will be affected or even removed when you need to undergo head X-ray, CT, or MRI. The non-metallic zirconium dioxide does not block the x-rays. As long as the zirconium dioxide porcelain teeth are inserted, there is no need to remove the dentures when head x-rays, CT, and MRI examinations are required in the future, saving a lot of trouble.

5. Zirconium dioxide is an excellent high-tech biological material. Good biocompatibility, better than various metal alloys, including gold. Zirconium dioxide has no irritation and no allergic reaction to the gums. It is very suitable for oral cavity and avoids allergies, irritation and corrosion caused by metals in the oral cavity.

6. Compared with other all-ceramic restoration materials, the strength of zirconia material allows doctors to achieve extremely high strength without too much abrasion of the patient’s real teeth. Among them, Vita all-ceramic plus yttrium stabilizes zirconia. It is also known as ceramic steel.

7. Zirconium dioxide porcelain teeth are of extremely high quality. It is said that its high quality is not only because of its materials and expensive equipment, but also because it uses the most advanced computer-aided design, laser scanning, and then controlled by computer programs. It is perfect.