Alaabta
57%.
Sharaxaad Gaaban:
57%.
Ilkaha 1500℃ blocks zirconium iyo 49 blocks zirconium iyo ce ilkaha zirconia banaan oo loo isticmaalo blocks zirconia been ah
Horudhaca YUCERA's 3D Plus Multilayer zirconia:
3D oo lagu daray multilayer zirconia blockis a zirconia ilkuhu (Y-TZP ZrO2) ee aadka u hufan, soo celinta monolithic.3D iyo multilayer zirconia block waxay bixisaa 700-1050MPa xoog dabacsanaan heer sare ah oo ay weheliso hufnaan sare.Qalabka jilicsan ka hor inta aan la isku dhejin waxay hubisaa habka wax soo saarka ee aan dadaalka lahayn.Dhadhanka dhoobada dhoobada ah waxay suurtogal u tahay nidaamyada guud ee dhoobada ah (eeg qiimaha CET).
Sifooyinka 3D Plus Multilayer ilkaha zirconia/ceramics block/madhan/ saxannada:
1. Cufnaanta cidhiidhiga ah ee saxanka zirconia 6.07 ± 0.03g/cm3
2. Quruxda quruxda badan - translucent sare iyo xoog sare.
3. Faafinta saxanka zirconia 57-43%
4. Doorashada midabka ballaaran - 19 midab (Blench, A1-D4).
5. Laacidda Awoodda disc zirconia 700-1050 MPa
6. Adag ee saxanka zirconia 1200HV
7. Tilmaamo balaadhan oo kala duwan - laga bilaabo dib u soo celinta hal ilig ilaa buundada cutubyo badan.
8. Vita 16 midabka A1-D4 iyo Blench OM1/2/3 midabka
9. Xirmooyinka zirconia ee ilkaha oo isku midab leh
10. CAD CAM nidaamka digital
11. Zirconium oxide translucent sare leh oo loogu talagalay bilicda qumman
Nidaaminta Ikhtiyaarada
1. Habaynta monolithic ama qayb dhoobada ahnecbaansho
2. buraash ikhtiyaari ah ama dhexgelin dhexgelin ah oo suurtagal ah
Tilmaamaha
Dib-u-soo-celinta Ilig-kaliya ( hore iyo dambe)
Buundooyinka 3-cutub ah ( hore iyo dambe)
Buundooyinka unugyo badan leh oo leh NexxZr + cad ( hore iyo dambe)
Baakadaha
Hal saxan
YUCERA dhammaan taxanaha
| Nooca | Koodhka | Hufnaan | Xoog Laabashada | Adag | Midabka | Cabbirka |
| block zirconia cad | HT | 40% | ≧1200Mpa(Av.) | 1200HV | Cadaan (dare midab leh oo leh vita 16 hadh iyo 26 hadh | Nidaamka furan & nidaamka Zirkon zahn & Nidaamka Amann Girrbach |
| ST | 43% | ≧1200Mpa(Av.) | 1200HV | |||
| block zirconia hore loo sii daayay | ST- Midabka | 43% | ≧1100Mpa(Av.) | 1200HV | Vita 16 hadh iyo BL1, BL2, BL3 | |
| Multilayer preshaded block zirconia | SHT-ML | 46% | ≧900Mpa(Av.) | 1200HV | ||
| UT-ML | 49% | ≧600Mpa(Av.) | 1200HV | |||
| 3D Plus-ML | 43% -57% | ≧700Mpa(Av.)–1050Mpa(Av.) | 1200HV |
Ku haboon nidaamka hoose
| Fur Nidaamka Cadcam | Nidaamka Zironzahn | Amann Girrbach |
| 98x10mm | 95x10mm | / |
| 98x12mm | 95x12mm | AGx12mm |
| 98x14mm | 95x14mm | AGx14mm |
| 98x16mm | 95x16mm | AGx16mm |
| 98x18mm | 95x18mm | AGx18mm |
| 98x20mm | 95x20mm | AGx20mm |
| 98x22mm | 95x22mm | AGx22mm |
| 98x25mm | 95x25mm | AGx25mm |
| SHT Multileyer/UT Multilayer/3D Multilayer Sintering Curve | ||||
| Talaabada sintay | Bilow heerkulka (℃) | Heerkulka dhamaadka(℃) | Waqtiga (min) | Heerka (℃/daqqo) |
| Tallaabada 1 | 20 | 900 | 90 | 9.7 |
| Tallaabada 2 | 900 | 900 | 30 | 0 |
| Tallaabada 3 | 900 | 1500 | 180 | 3.3 |
| Tallaabada 4 | 1500 | 1500 | 120 | 0 |
| Tallaabada 5 | 1500 | 800 | 60 | -11.6 |
| Tallaabada 6 | 800 | qaboojinta dabiiciga ah 20 | 120 | -6.5 |
