Iimveliso
57% Translucency 3D Plus Multilayer Dental Zirconia Block False Dental Zirconia Discs
Inkcazelo emfutshane:
57% Translucency 3D Plus Multilayer Dental Zirconia Block False Dental Zirconia Discs
Amazinyo ayi-1500℃ iibhloko ze-zirconium kunye neebhloko ze-zirconium ezingama-49 kunye ne-zirconia yamazinyo engenanto esetyenziswa kwiibhloko ze-zirconia zobuxoki.
Intshayelelo ye-YUCERA's 3D Plus Multilayer yamazinyo zirconia:
I-3D kunye nebloko ye-zirconia ye-multilayer yi-zirconia yamazinyo (Y-TZP ZrO2) ukwenzela ukuguquguquka okuphezulu, ukubuyisela i-monolithic.I-3D kunye ne-multilayer zirconia block inikezela nge-700-1050MPa amandla abalaseleyo aphezulu aguquguqukayo adityaniswe nokuguquguquka okuphezulu.Izinto ezithambileyo phambi kokuba sintering ziqinisekisa inkqubo yokuvelisa engenamgudu.I-All-ceramic veneering inokwenzeka kunye neenkqubo eziqhelekileyo ze-ceramic (jonga ixabiso le-CET).
Iimpawu ze-3D Plus Multilayer zirconia zamazinyo / ibhloko ye-ceramics / blank / iidiski:
1. ISintered Density ye-zirconia disc 6.07 ± 0.03g/cm3
2. I-aesthetics ebalaseleyo - i-translucent ephezulu kunye namandla aphezulu.
3. Ukugqithiswa kwe-zirconia disc 57-43%
4. Ukukhetha umbala obanzi - imibala eyi-19 (iBlench, i-A1-D4).
5. Ukugoba Amandla e-zirconia disc700-1050 MPa
6. Ukuqina kwe-zirconia disc 1200HV
7. Uluhlu olubanzi lwezibonakaliso - ukusuka ekubuyiseleni izinyo elinye ukuya kwibhulorho yeeyunithi ezininzi.
8. I-Vita 16 umbala we-A1-D4 kunye neBlench OM1/2/3 umbala
9. Iibhloko ze-zirconia zamazinyo ezinemibala ezimeleyo
10. Inkqubo yedijithali yeCAD CAM
11. I-zirconium oxide ephezulu ye-translucent ye-aesthetics egqibeleleyo
Iinketho Zokuqhuba
1. Monolithic processing okanye inxenye ceramic veukugxeka
2. Ibhrashi yokuzikhethela okanye ukungena ngaphakathi kunokwenzeka
Iimpawu
Ukubuyisela izinyo elinye (ngaphambili nasemva)
Iibhulorho zeyunithi ezi-3 (ngaphambili nasemva)
Iibhulorho ezineyunithi ezininzi ezineNexxZr + ezimhlophe (ngaphambili nasemva)
Ukupakishwa
Icwecwe elinye
YUCERA yonke series
| Uhlobo | Ikhowudi | Translucency | Ukugoba Amandla | Ukuqina | Umbala | Ubungakanani |
| Ibhloko ye-zirconia emhlophe | HT | 40% | ≧1200Mpa(Av.) | 1200HV | Mhlophe (ulwelo olunemibala kunye ne-vita 16 shades kunye ne-26 izithunzi | Vula inkqubo & neZirkon zahn inkqubo & neNkqubo yeAmann Girrbach |
| ST | 43% | ≧1200Mpa(Av.) | 1200HV | |||
| Ibhloko ye-zirconia yangaphambili | ST-Umbala | 43% | ≧1100Mpa(Av.) | 1200HV | I-Vita 16 i-shades kunye ne-BL1, i-BL2, i-BL3 | |
| Multilayer preshaded zirconia block | I-SHT-ML | 46% | ≧900Mpa(Av.) | 1200HV | ||
| UT-ML | 49% | ≧600Mpa(Av.) | 1200HV | |||
| 3D Plus-ML | 43%-57% | ≧700Mpa(Av.)–1050Mpa(Av.) | 1200HV |
Ifanele inkqubo engezantsi
| Vula iNkqubo yeCadcam | Inkqubo yeZironzahn | Amann Girrbach |
| 98x10mm | 95x10mm | / |
| 98x12mm | 95x12mm | AGx12mm |
| 98x14mm | 95x14mm | AGx14mm |
| 98x16mm | 95x16mm | AGx16mm |
| 98x18mm | 95x18mm | AGx18mm |
| 98x20mm | 95x20mm | AGx20mm |
| 98x22mm | 95x22mm | AGx22mm |
| 98x25mm | 95x25mm | AGx25mm |
| I-SHT Multileyer / UT Multilayer / 3D Multilayer Sintering Curve | ||||
| Sintering inyathelo | Ubushushu bokuqalisa(℃) | Ubushushu bokuphela(℃) | Ixesha(Umzuzu) | Ireyithi(℃/Mzu) |
| Inyathelo loku-1 | 20 | 900 | 90 | 9.7 |
| Inyathelo lesi-2 | 900 | 900 | 30 | 0 |
| Inyathelo lesi-3 | 900 | 1500 | 180 | 3.3 |
| Inyathelo lesi-4 | 1500 | 1500 | 120 | 0 |
| Inyathelo lesi-5 | 1500 | 800 | 60 | -11.6 |
| Inyathelo lesi-6 | 800 | ukupholisa kwendalo 20 | 120 | -6.5 |
