page_banner

5 Axis CAD CAM dental milling machine

  • Yucera Dental Milling Machine Cad Cam System SK-5A 5axis Dental Milling Machine

    Yucera Dental Milling Machine Cad Cam System SK-5A 5axis Dental Milling Machine

    Yucera SK-5A 5axis Dental Milling Machine is designed as a split machine, which is easy to maintain the main machine, reduces the damage to the main machine by dust, and prolongs the service life of the machine; the machine has a lower center of gravity, strong stability, and the working speed is increased by 20%; Increase the utilization rate of zirconium blocks by 30%, and can cut 38-40 crowns/bridges at a time

     

     

     

  • Yucera Fraiseuse 5 Axes Dentaire Cad Cam Dental Milling Machine

    Yucera Fraiseuse 5 Axes Dentaire Cad Cam Dental Milling Machine

    Yucera fraiseuse 5 axes dentaire cad cam dental milling machine fresadora lab dental for cadcam zirconia 5 axis milling machine

     

     

  • Dental 5 Axis Milling Machine Table Dental Mills

    Dental 5 Axis Milling Machine Table Dental Mills

    Technical parameter for 5 axis milling machine:

    Axis 5 Axis
    Cut Method dry milling
    Milling Materials zirconia block, pmma, wax, PEEK
    Size of milling materials φ98, thickness(10-30mm)
    Range of rotation & tling rotation x/y/z: 105 / 135/ 90 A:360° B:±30°
    Speed of Principal axis 0-60000rpm / 500w
    Driver Full rotation servo motor drive
  • Chinese Factory Dental Zirconia Milling Machine CADCAM Dental Laboratory CNC Milling Machines

    Chinese Factory Dental Zirconia Milling Machine CADCAM Dental Laboratory CNC Milling Machines

    Key techinical parameter :

    Length, width and height Cutting machine:550*565*460mmMain engine :450*250*450mm Processing methods Five-axis linkage, dry milling
    weight Cutting machine:95KGMain engine:20KG Processable type Inner crowns, full crowns, bridges, implant bridges, implant upper restorations, inlays, onlay, veneer, coping etc.
    Rotating axis operating angle A:360° B:±30° Main axis speed 0-60,000rmp
    Total power 800W Working pressure 4.5-7.5bar(no water, no gasoline )
    Cutting precision 0.2mm Installation conditions Stable voltage:220-230VStable air pressure≥6.0bar

    Temperature:15-35℃

    Relative humidity<80%

    Tool magazine capacity 5 Transmission interface USB/Ethernet
    Burs specifications Special props for handle diameter 4mmAutomatic tool change, automatic tool detection Milling Materials zirconia blocks , PMMA, Wax,Composite material
  • Yucera 5 Axis PMMA Dental Milling Machine For Zirconia Bloc

    Yucera 5 Axis PMMA Dental Milling Machine For Zirconia Bloc

    G. W.:150KG

    Material: Acrylic+Metal

    Application:dental milling machine for zirconia/PMMA/Wax/Peek blocks

  • Dental Milling Machine For Zirconia Block And PMMA

    Dental Milling Machine For Zirconia Block And PMMA

    1. Horizontal processing-speed can be increased by nearly 20%;

    2. Simplifying maintenance – When the all-in-one machine fails, the after-sales maintenance is more complicated. The split equipment only needs to replace the processing system to complete the update and maintenance;

    3. Tool detection sensor with 2um;

    4. 24hours on-line technical support;

    5. Include hyperdent(free)

  • Laboratory CAD CAM Dental Milling Machine Mechanical 5 Axis

    Laboratory CAD CAM Dental Milling Machine Mechanical 5 Axis

    Technology Parameter of CADCAM dental milling machine

    Length, width and height Cutting machine:550*565*460mmMain engine :450*250*450mm Processing methods Five-axis linkage, dry milling
    weight Cutting machine:95KGMain engine:20KG Processable type Inner crowns, full crowns, bridges, implant bridges, implant upper restorations, inlays, onlay, veneer, coping etc.
    Rotating axis operating angle A:360° B:±30° Main axis speed 0-60,000rmp
    Total power 800W Working pressure 4.5-7.5bar(no water, no gasoline )
    Cutting precision 0.2mm Installation conditions Stable voltage:220-230VStable air pressure≥6.0bar

    Temperature:15-35℃

    Relative humidity<80%

    Tool magazine capacity 5 Transmission interface USB/Ethernet
    Burs specifications Special props for handle diameter 4mmAutomatic tool change, automatic tool detection Milling Materials zirconia blocks , PMMA, Wax,Composite material
  • Yucera CAD CAM 5 Axis Zirconia Milling Machine For Dental Laboratory Glass Ceramic Composites Wax PMMA

    Yucera CAD CAM 5 Axis Zirconia Milling Machine For Dental Laboratory Glass Ceramic Composites Wax PMMA

    After 2 years of design and development,more than 100 labs tested, our Separation of mechanical and electrical control get unanimous praise
    1. Horizontal processing-speed can be increased by nearly 20%
    2. simplifying maintenance- When the all-in-one machine fails, the after-sales maintenance is more complicated. The split equipment only needs to replace the processing system to complete the update and maintenance;
    3.Tool detection sensor with 2um
    4.24hours on-line technical support
    5.include hyperdent(free)

  • 5 Axis Dental CAD CAM Milling Machine For Zirconia Block In Separation Design Denal CNC Machine In Dry Machine

    5 Axis Dental CAD CAM Milling Machine For Zirconia Block In Separation Design Denal CNC Machine In Dry Machine

    1. Horizontal processing-speed can be increased by nearly 20%

    2. Simplifying maintenance- When the all-in-one machine fails, the after-sales maintenance is more complicated. The split equipment only needs to replace the processing system to complete the update and maintenance;

    3. Tool detection sensor with 2um

    4. 24hours on-line technical support

    5. Include hyperdent(free)

     

  • China wholesale dental lab 5 axis CNC zirconia cad cam dental milling machine

    China wholesale dental lab 5 axis CNC zirconia cad cam dental milling machine

    size Cutting machine: 550x565x460mm
    Main machine: 450x250x450mm
    Net Weight Cutting machine: 95KG
    Host: 20KG
    Rotation angle A 360° B:+30°
    Power 0.8kw
    Milling precision 0.2mm
    Tools Library 5
    Tool specifications Special tools with a handle diameter of 4mm,
    automatic tool change and automatic tool detection.
    Processing method five-axis linkage, manual milling
    Machinable type inner crown, full crown, bridge, planting bridge,  temporary restoration of crown post and core, inlay, bolt, telescopic crown
    Maximum Speed 0-60000rmp
    Rated working pressure 4.5-6.0bar (no oil and no water)
    lnstallation conditions Stable voltage: 220-230V stable pressure ≥ 6.0bar
    Humidity: 1 5-35℃ Relative humidity <80%
    Transmission interface USB/Ethernet (rear UsB connector, wire connector)
    Mill material zirconia. wax.resin. composite materials
  • 5 Axes Dentaire CAD CAM Milling Machine For Zirconia PMMA Wax

    5 Axes Dentaire CAD CAM Milling Machine For Zirconia PMMA Wax

    Axis

     5 Axis

    Cut Method

    dry milling

    Milling Materials

    zirconia block, pmma, wax, PEEK

    Size of milling materials

    φ98, thickness(10-30mm)

     Range of rotation & tling rotation

     x/y/z: 105 / 135/ 90  A:360° B:±30°

     Speed of Principal axis

     0-60000rpm / 500w

     Driver

     Full rotation servo motor drive

  • Yucera Fraiseuse 5 Axes Dentaire For Zirconia PMMA Wax 5 Axis Dental CADCAM Milling Machine For Odontologia Equipamento

    Yucera Fraiseuse 5 Axes Dentaire For Zirconia PMMA Wax 5 Axis Dental CADCAM Milling Machine For Odontologia Equipamento

    Axis

     5 Axis

    Cut Method

    dry milling

    Milling Materials

    zirconia block, pmma, wax, PEEK

    Size of milling materials

    φ98, thickness(10-30mm)

     Range of rotation & tling rotation

     x/y/z: 105 / 135/ 90  A:360° B:±30°

     Speed of Principal axis

     0-60000rpm / 500w

     Driver

     Full rotation servo motor drive

12 Next > >> Page 1 / 2