-
Yucera 5 Axis PMMA Dental Milling Machine For Zirconia Bloc
G. W.：150KG
Material： Acrylic+Metal
Application：dental milling machine for zirconia/PMMA/Wax/Peek blocks
-
Dental Milling Machine For Zirconia Block And PMMA
1. Horizontal processing-speed can be increased by nearly 20%;
2. Simplifying maintenance – When the all-in-one machine fails, the after-sales maintenance is more complicated. The split equipment only needs to replace the processing system to complete the update and maintenance;
3. Tool detection sensor with 2um;
4. 24hours on-line technical support;
5. Include hyperdent(free)
-
Laboratory CAD CAM Dental Milling Machine Mechanical 5 Axis
Technology Parameter of CADCAM dental milling machine
Length, width and height Cutting machine:550*565*460mmMain engine :450*250*450mm Processing methods Five-axis linkage, dry milling weight Cutting machine:95KGMain engine:20KG Processable type Inner crowns, full crowns, bridges, implant bridges, implant upper restorations, inlays, onlay, veneer, coping etc. Rotating axis operating angle A:360° B:±30° Main axis speed 0-60,000rmp Total power 800W Working pressure 4.5-7.5bar(no water, no gasoline ) Cutting precision 0.2mm Installation conditions Stable voltage:220-230VStable air pressure≥6.0bar Temperature:15-35℃
Relative humidity＜80%
Tool magazine capacity 5 Transmission interface USB/Ethernet Burs specifications Special props for handle diameter 4mmAutomatic tool change, automatic tool detection Milling Materials zirconia blocks , PMMA, Wax,Composite material -
Yucera CAD CAM 5 Axis Zirconia Milling Machine For Dental Laboratory Glass Ceramic Composites Wax PMMA
After 2 years of design and development,more than 100 labs tested, our Separation of mechanical and electrical control get unanimous praise
1. Horizontal processing-speed can be increased by nearly 20%
2. simplifying maintenance- When the all-in-one machine fails, the after-sales maintenance is more complicated. The split equipment only needs to replace the processing system to complete the update and maintenance;
3.Tool detection sensor with 2um
4.24hours on-line technical support
5.include hyperdent(free) -
High Performance Roland CAD CAM Dental Milling Burs For Laboratory Dental, Dental Cutter for Roland DWX 50/51D/52 Sizes 2.0/1.0/0.6/0.3mm
Deatailed Specification of Roland Dental Milling Burs:
Roland dental milling burs
Shank dia. mm
Overall Length mm
Available sizes mm
CrN for PMMA &Wax
4.0
50.0
0.3/0.6/1.0/2.0
CN for zirconia block
4.0
50.0
0.3/0.6/1.0/2.0
DC for zirconia block
4.0
50.0
0.3/0.6/1.0/2.0
-
5 Axis Dental CAD CAM Milling Machine For Zirconia Block In Separation Design Denal CNC Machine In Dry Machine
1. Horizontal processing-speed can be increased by nearly 20%
2. Simplifying maintenance- When the all-in-one machine fails, the after-sales maintenance is more complicated. The split equipment only needs to replace the processing system to complete the update and maintenance;
3. Tool detection sensor with 2um
4. 24hours on-line technical support
5. Include hyperdent(free)
-
China wholesale dental lab 5 axis CNC zirconia cad cam dental milling machine
size Cutting machine: 550x565x460mm Main machine: 450x250x450mm Net Weight Cutting machine: 95KG Host: 20KG Rotation angle A 360° B:+30° Power 0.8kw Milling precision 0.2mm Tools Library 5 Tool specifications Special tools with a handle diameter of 4mm,
automatic tool change and automatic tool detection.Processing method five-axis linkage, manual milling Machinable type inner crown, full crown, bridge, planting bridge, temporary restoration of crown post and core, inlay, bolt, telescopic crown Maximum Speed 0-60000rmp Rated working pressure 4.5-6.0bar (no oil and no water) lnstallation conditions Stable voltage: 220-230V stable pressure ≥ 6.0bar Humidity: 1 5-35℃ Relative humidity <80% Transmission interface USB/Ethernet (rear UsB connector, wire connector) Mill material zirconia. wax.resin. composite materials -
5 Axes Dentaire CAD CAM Milling Machine For Zirconia PMMA Wax
Axis
5 Axis
Cut Method
dry milling
Milling Materials
zirconia block, pmma, wax, PEEK
Size of milling materials
φ98, thickness(10-30mm)
Range of rotation & tling rotation
x/y/z: 105 / 135/ 90 A:360° B:±30°
Speed of Principal axis
0-60000rpm / 500w
Driver
Full rotation servo motor drive
-
Yucera Fraiseuse 5 Axes Dentaire For Zirconia PMMA Wax 5 Axis Dental CADCAM Milling Machine For Odontologia Equipamento
Axis
5 Axis
Cut Method
dry milling
Milling Materials
zirconia block, pmma, wax, PEEK
Size of milling materials
φ98, thickness(10-30mm)
Range of rotation & tling rotation
x/y/z: 105 / 135/ 90 A:360° B:±30°
Speed of Principal axis
0-60000rpm / 500w
Driver
Full rotation servo motor drive
-
Yucera’s factory specializing in the production of zirconia, dental laboratory ceramic grinding heads for zirconia 100 per box
Description of dental zirconia polishing kit:
1. high performance dental zirconia polishing kit with pure diamond grain to provide excellent results. Short reduction, smoothing and polishing for mirror gloss.
2. creates great adjustments in China, high strength metal such as zirconium and alumina.
3. D2 series (monochrome): reducing, trimming, smoothing and polishing high gloss of China, precious metals, meta, zirconium, etc. D.
-
Dental Lab CAD CAM 5 axis for crconia block wax PMMA engraving and milling machine
SK-5A Для резьбы по керамическому блоку （Zirconia block /PMMA/WAX/PEEK Сухой）
*Automatically recognition of tool path, shorten the working time and improve the production efficiency.
*Excellent and simple man-machine interface, easy operation,no need for professional CAD / cam operation skills, just one click operation
*Fully automatic tool change during machining, saving tool change, tool setting, measuring time, effectively improving work efficiency
-
2021 Newest Milling All 98 Ceramic Disc Dental CAD CAM CNC Carving Machine 5 Axis Dental Machine
Character for 5 Axis Dental Machine :
After 2 years of design and development,more than 100 dental labs tested, our Separation of mechanical and electrical control design to get unanimous praise:
1. Horizontal processing-speed can be increased by nearly 20%
2. simplifying maintenance- When the all-in-one machine fails, the after-sales maintenance is more complicated. The split equipment only needs to replace the processing system to complete the update and maintenance;
3.Tool detection sensor with 2um
4.24hours on-line technical support
5.include hyperdent(free)
